TM 11-5895-1412-12&P
Select this option and the following message
“Press REQUEST on fill device to
Lockout L#”.
is displayed:
begin transfer
Set the ECCM fill device to the desired position (1-13) and
REQUEST button on the ECCM fill device.
The following message appears:
“Transfer Complete for Cell: #“.
of Common
press the
Watch for the green LED on the ECCM fill device to flash indicating a
good fill.
The flash should occur after a count of five. The common
lockout number and ECCM fill device position will both increment. Only
one location is stored in a position in the fill device.
Continue the process until all of the common lockouts have been loaded.
At that time, the transfer options menu returns to the screen.
The number of
2. HOPSET
NOTE:
common lockouts varies with different frequency resources.
(OPERATIONAL TRANSEC)
Use this option to transfer the net lockout set(s) using the operational
TRANSEC Key.
Select this option and enter the level number (1-6) to be transferred
and the Net ID Group Number, O -9 (hundreds digit).
NOTE :
Though the Net ID Group Numbers have been established by doctrine, the program
allows any Net ID Number to be used with any level of hopset.
Enter the numbers and the following message appears:
“Press REQUEST on fill device to begin transfer of N#”.
Set the ECCM fill device to the desired position (1-13) and press the
REQUEST button on the ECCM fill device.
The following message appears:
“Transfer Complete for Cell: #“.
Watch for the green LED on the ECCM fill device to flash indicating a
good fill.
The flash should occur after a count of two.
Continue the process until all of the net lockouts required are loaded.
If L7 and/or L8 are required, you are prompted to transfer them after
the corresponding net lockout.
2-106
