Figure 2-95
TM 11-5895-1412-12&P
Set the ECCM fill device to the desired position (1-13) and press the
REQUEST button on the ECCM fill device.
The following message appears:
“Transfer Complete for Cell: #“.
Watch for the red LED on the ECCM fill device to flash indicating a good
fill.
The flash should occur after a count of five. The common lockout
number and ECCM fill device position both increment. Only one lockout
is loaded into one position in the fill device.
Continue the process until all of the common lockouts are loaded. At
that time, the transfer options menu returns to the screen.
NOTE:
The number of common lockouts varies with different frequency resources.
2. HOPSET
Use this option to transfer the net lockout set(s) to the fill device
Select this option and enter the level number (l-6) to be transferred
(based on the hopset file selected) and the Net ID Group Number, O - 9
(hundreds digit).
NOTE:
Though the Net ID Group Numbers have been established by doctrine, the program
allows any Net ID Number to be used with any level of hopset.
2-108
