OPERATIONAL TRANSEC - TM-11-5895-1412-12P

OPERATIONAL TRANSEC - TM-11-5895-1412-12P_137

HOPSET Use option NOTE: common lockouts varies with different frequency resources. (OPERATIONAL TRANSEC)

TM-11-5895-1412-12P Basic Generation Unit AN/GYK-33 (NSN 5895-01-260-4545) (EIC:N/A) Manual
Page Navigation
129

TM 11-5895-1412-12&P When transferring Non-ICOM SINCGARS data to a“MX-18290, the TRANSEC Keys are loaded using the Non-ICOM transfer options. The common lockout(s) and net lockout(s) are loaded using the ICOM transfer options. To transfer Non-ICOM fill data to a MX-18290, select option <f2>, Transfer to Non-ICOM device, from the screen shown in Figure 2-92 (Transfer Menu). Select this option and the Select TRANSEC Key screen is displayed as shown in Figure 2-93. Enter the TRANSEC Key number, press <RETURN> and the Non-ICOM Transfer Options screen shown in Figure 2-90 is displayed. Use the help screen for function key descriptions. 1. OPERATIONAL TRANSEC Use option <f3> to transfer the operational TRANSEC Key. Select this option and the following message is displayed: “Press REQUEST on fill device to begin transfer of TRANSEC Key l“. Set the ECCM fill device to the desired position (T1) and press the REQUEST button on the ECCM fill device. Watch for the green LED on the ECCM fill device to flash indicating a successful fill. The flash should occur after a count of two. 2 . SPARE TRANSEC Use option <f4> to transfer the spare TRANSEC Key. Select this option and the following message is displayed: “Press REQUEST on fill device to begin transfer of TRANSEC Key 2". Set the ECCM fill device to the desired position (T2) and press the REQUEST button on the ECCM fill device. Watch for the green LED on the ECCM fill device to flash indicating a successful fill. The flash should occur after a count of two. 3 . COMMON LOCKOUT SETS After loading the TRANSEC Keys (operational and spare), press <f8> two times to return to the Transfer Menu shown in Figure 2-92. Next, select option <f1> and the Select TRANSEC Key screen is displayed as shown in Figure 2-93. Select the same TRANSEC Key number that was selected before when transferring the TRANSEC Keys in 1. Operational Transec and 2. Spare Transec in previous paragraph. Press <RETURN> and the ICOM Transfer Options screen shown in Figure 2-94 is displayed. Use the help screen for a description of the function keys. 2-110

Privacy Statement
Press Release
Contact