TM 11-5895-1412-12&P
Use option <f1> to transfer the common lockout set(s) (L1-L6) of a
generated hopset.
If this option is selected and the hopset contains no
common lockouts, it is indicated on the screen and the program returns
to the ICOM Transfer Options Menu (Figure 2-94).
Select this option and the following message is displayed:
Press REQUEST on fill device to begin transfer of Common
Lockout L#.
Set the ECCM fill device to the desired position (1-13) and press the
REQUEST button on the ECCM fill device.
The following message appears:
Transfer Complete for Cell: #.
Watch for the green LED on the ECCM fill device to flash indicating a
good fill.
The flash should occur after a count of five. The common
lockout number and ECCM fill device position will both increment.
Continue the process until all of the common lockouts have been loaded.
At that time, the transfer options menu returns to the screen.
The number of
4. HOPSET
Use option
NOTE:
common lockouts varies with different frequency resources.
(OPERATIONAL TRANSEC)
<f2> to transfer the net lockout set(s).
Select this option and enter the level number (1-6) to be transferred
and the Net ID Group Number, O - 9 (hundreds digit).
Though the Net ID Group
allows any Net
Enter the numbers
NOTE:
Numbers have been established by doctrine, the program
ID Number to be used with any level of hopset.
and the following message appears:
Press REQUEST on fill device to begin transfer of N#.
Set the ECCM fill device to the desired position (1-13) and press the
REQUEST button on the ECCM fill device.
The following message appears:
Transfer Complete for Cell: #.
Watch for the green LED on the ECCM fill device to flash indicating a
good fill.
The flash should occur after a count of two.
2-111