TM 5-2420-224-20-2
BACKHOE CONTROL LEVER REPLACEMENT (CONT)
NOTE
If needed, adjust control rods at this time (page 4-531).
12. INSTALL COVER (42), three washers (43), and three new self-tapping screws (44) in control tower (18).
13. ROTATE
14. INSTALL
15. INSTALL
two RODS (7) outward from center and TIGHTEN two NUTS (6).
five KNOBS (45) on three control handles (2, 3, and 4) and two rods (7).
grease FITTING (46) in bracket (47).
16. CONNECT tilt CYLINDER (48) and INSTALL PIN (49) and two retaining rings (50).
NOTE
Follow-on Maintenance:
Install backhoe seat (page 4-444).
4-530
