TM 5-2420-224-20-2
STEERING WHEEL BRACKET AND SEAL REPLACEMENT (CONT)
NOTE
Perform step 1 only if seal was removed.
1.
INSTALL new seal (19), COVER (18), and hose clamp (17) on steering shaft (8).
2.
INSTALL FRAME (16), six washers (15), and six screws (14).
3.
INSTALL FRAME (13), spacer (12), five washers (11), and five screws (10).
4.
INSTALL two edge GUARDS (9) on steering bracket (4).
5.
INSTALL steering BRACKET (4), two new spring tension washers (7), two washers (6), and two screws
(5) on steering shaft (8).
6.
INSTALL two new lock washers (3), two washers (2), and two BOLTS (1) on steering bracket (4).
NOTE
Follow-on Maintenance:
Install steering upper shaft bearing (page 4-351).
Install trailer hand brake valve (page 4-326).
Install horn, low beam/high beam switch (page 4-215).
4-345
