TM 5-2420-224-20-2
STEERING ARM REPLACEMENT (CONT)
2.
REMOVE three screws (5, 6, and 7) and
steering ARM (8).
INSTALLATION
1.
APPLY COAT of SEALING COMPOUND to
three SCREWS (1, 2, and 3) and INSTALL
steering ARM (4) and three screws (1, 2, and
3). TIGHTEN two SCREWS (1 and 3) to 295
Ib-ft (400 N.m) and SCREW (2) to 133 Ib-ft
(180 N.m).
2.
APPLY COAT of SEALING COMPOUND to
three SCREWS (5, 6, and 7) and INSTALL
steering ARM (8) and three screws (5, 6, and
7). TIGHTEN SCREW (5) to 133 lb-ft (180
N.m) and two SCREWS (6 and 7) to 295 lb-ft
(400 N.m).
NOTE
Follow-on Maintenance:
Install tie rod (page 4-338).
Install drag link (page 4-346).
Service hubs with oil (LO 5-2420-
224-12).
4-350
