TM 5-2420-224-20-2
STEERING UPPER SHAFT BEARING REPLACEMENT (CONT)
I N S T A L L A T I O N
1.
2.
3.
4.
5.
INSTALL BEARING (1) in bracket (2).
INSTALL steering SHAFT (3) in bracket (2).
INSTALL steering WHEEL (4), washer (5),
and nut (6) on steering shaft (3). TIGHTEN
NUT to 55 lb-ft (75 N.m).
BY PUSHING at CENTER of steering WHEEL
(4), INSTALL steering SHAFT (3) in universal
joint (7) until spline end is completely seated
in universal joint (7).
INSTALL SCREW (8) and nut (9) on universal
joint (7).
6.
INSTALL plastic CAP (10) on steering wheel
(4).
NOTE
Follow-on Maintenance:
Install outside engine hood (page
4-388) .
4-353
