TM 5-2420-224-20-2
STEERING WHEEL BRACKET AND SEAL REPLACEMENT
This task covers: a. Removal b. Installation
INITIAL SETUP
Tools and Special Equipment:
Equipment Condition:
Tool Kit, SC 5180-90-CL-N26
Reference
Condition Description
Materials/Parts:
Page 4-215
Horn, Low Beam/High
Beam Switch Removed
Washer, Lock (2)
Washer, Spring
Page 4-326
Trailer Hand Brake Valve
Removed
Tension (2)
Page 4-351
Steering Upper Shaft
Bearing Removed
REMOVAL
1.
REMOVE two BOLTS (1), two washers (2), and two lock washers (3) from steering bracket (4).
DISCARD lock WASHERS.
2.
REMOVE two screws (5), two washers (6), two spring tension washers (7), and steering BRACKET (4)
from steering shaft (8). DISCARD spring tension WASHERS.
3.
REMOVE two edge GUARDS (9) from steering bracket (4).
4.
REMOVE five screws (10), five washers (11), spacer (12), and FRAME (13).
5.
REMOVE six screws (14), six washers (15), and FRAME (16).
NOTE
Perform step 6 only if seal is damaged.
6.
REMOVE hose clamp (17), COVER (18) and seal (19) from steering shaft (8).
4-344
