TM 5-2420-224-20-2
T I E R O D R E P L A C E M E N T A N D R E P A I R ( C O N T )
1.
2.
3.
4.
REMOVE cotter pin (1) and castellated NUT
(2). DISCARD cotter PIN.
REMOVE cotter pin (3) and castellated NUT
(4). DISCARD cotter PIN.
USING REMOVAL TOOL, DISCONNECT end
of tie ROD (5) and REMOVE rubber BOOT
(6). DISCARD rubber BOOT.
USING REMOVAL TOOL, REMOVE tie ROD
(5) and rubber BOOT (7). DISCARD rubber
BOOT.
NOTE
Procedure is the same for both
sides.
1.
REMOVE NUT (1), lock WASHER (2), and
SCREW (3). DISCARD lock WASHER.
2.
REMOVE JOINT (4) and clamp (5).
4-339
