TM 11-5895-1412-12&P
A. NEXT GROUP
Use this option to go to the share group located after the current share group
in the list of share groups.
B. PREVIOUS GROUP
Use this option to go to the share group located before the current share
group in the list of share groups.
C. FIND GROUP
Use this option to find
selected, the next open
D. NEW GROUP
a particular share group. Once this option is
share group appears.
Use this option to insert a new group.
E. SAVE
Use this option to save changes or additions made to the frequency sharing
groups information located inside of the computer. The information is not
permanently saved until a SAVE TO DISK is performed.
Use this option to implement a special nets plan. A special nets plan allows
you to specify a cosite separation between pairs of nets which is greater than
what can be accomplished via cosite planning, Up to 50 net pairs can be
entered into the special nets plan (only one plan can be created). The
separation factor may be in the range 1-15 MHz. Each net pair can have a
different separation.
The separation factor must be evenly divisible by 0.5
MHz .
After selecting <f7> from Figure 2-8 in Net & Frequency Options Info, the
screen shown in Figure 2-32 is displayed.
f1 -
allows you to create a new special net plan.
f2 -
allows you to modify an existing special net plan.
f3 -
allows you to print information about the current special net
plan.
f8 -
allows you to return to the previous menu.
After selecting <f1> from Figure 2-32, you are warned that selecting the
create option destroys existing information in the BGU. Choosing Y allows
you to continue and N returns you to the screen shown in Figure 2-32.
Selecting <f3> from Figure 2-32 allows you to print information about the
special nets plan.
After selecting <f3>, the BGU prints the entire special
net plan.
2-46