TM 5-2420-224-20-2
CRANE TRAVEL LOCK REPLACEMENT AND ADJUSTMENT
This task covers:
a. Removal b. Installation c. Adjustment
INITIAL SETUP
Applicable Configuration:
References:
HMMH
TM 5-2420-224-10
Tools and Special Equipment:
Equipment Condition:
Tool Kit, SC 5180-90-CL-N26
Reference
Condition Description
Materials/Parts:
Page 2-23
Crane in Three-Point
Strap, Tiedown
Stance
Nut, Lock (2)
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
HOLD NUT (1) and REMOVE KNOB (2).
REMOVE two NUTS (1 and 3).
REMOVE CONTROL assembly (4) from bracket (5).
REMOVE two nuts (6), two bolts (7), and BRACKET (5).
REMOVE and DISCARD tiedown STRAP (8).
REMOVE spring PIN (9).
LOOSEN NUT (10) and REMOVE CONTROL assembly (4) from rear of mounting bracket (11).
REMOVE PIN (12) from mounting bracket (11).
REMOVE PIN (13) and pin (12) from control assembly (4).
LOOSEN NUT (14) and REMOVE ADAPTER (15) from control assembly (4).
REMOVE CONTROL assembly (4) from mounting bracket (11).
REMOVE SPRING (16) from mounting bracket (11).
REMOVE four nuts (17), four capscrews (18), and MOUNT (19).
REMOVE two lock nuts (20), two capscrews (21), and mounting BRACKET (11). DISCARD lock NUTS.
IF DAMAGED, REMOVE lubrication FITTING (22) and BUSHING (23) from pin (12).
-
4-786
R E M O V A L