TM 5-2420-224-20-2
CRANE REPLACEMENT (CONT)
R E M O V A L
NOTE
Tag wires prior to removal to aid
in installation.
1.
CAREFULLY ROLL BACK rubber BOOTS and
REMOVE two nuts (1) and two WIRES (2).
2.
REMOVE four screws (3) and BOX (4).
NOTE
In steps 3 and 4, it may be
necessary to use outrigger and
boom controls to remove pressure
on pivot pins.
3.
REMOVE two snap rings (5) and pivot PIN
(6) on right side crane mounting.
4-777
