TM 5-2420-224-20-2
BACKHOE STABILIZER REPLACEMENT
This task covers:
a. Removal b. Installation
Applicable Configuration:
SEE
Tools and Special Equipment:
Shop Equipment, SC 4910-95-CL-A74
Tool Kit, SC 5180-90-CL-N26
Personnel Required: (2)
Equipment Condition:
Reference
Condition Description
Page 4-673
Backhoe Stabilizer
Cylinders Removed
General Safety Instructions:
W A R N I N G
Backhoe stabilizer weighs 140
p o u n d s ( 6 4 k i l o g r a m s ) . T o
avoid personal injury, use a
hoist or suitable lifting device
when lifting backhoe stabilizer.
NOTE
Procedure is the same for both backhoe stabilizers.
1.
REMOVE two retaining rings (1) and four WASHERS (2).
2.
REMOVE two retaining rings (3), flat WASHER (4), and bearing WASHER (5).
3.
ATTACH suitable HOIST. REMOVE two PINS (6 and 7) and LIFT backhoe STABILIZER (8) clear of
mounting frame (9) and stabilizer pad (10).
4.
USING suitable PRESS, REMOVE two BUSHINGS (11) from backhoe stabilizer (8).
4-774
INITIAL SETUP
R E M O V A L
