TM 5-2420-224-20-2
BACKHOE STABILIZER REPLACEMENT (CONT)
INSTALLATION
NOTE
Procedure is the same for both backhoe stabilizers.
1.
USING suitable PRESS, INSTALL two BUSHINGS (11) in backhoe stabilizer (8).
2.
ATTACH suitable HOIST. INSTALL backhoe STABILIZER (8) on mounting frame (9) and INSTALL PIN
(6).
3.
PLACE backhoe stabilizer PAD (10) in position under backhoe stabilizer (8) and INSTALL PIN (7).
4.
INSTALL flat WASHER (4), bearing WASHER (5), and two retaining rings (3).
5.
INSTALL four WASHERS (2) (two on each side) and two retaining rings (1).
NOTE
Follow-on Maintenance:
Install backhoe stabilizer cylinders (page 4-673).
4-775