TM 5-2420-224-20-2
BACKHOE CONTROL LEVER REPLACEMENT (CONT)
2.
3.
4.
5.
6.
7.
REMOVE grease FITTING (4) from bracket (5).
REMOVE five KNOBS (6) from three control handles (7 8, and 9) and two rods (10).
LOOSEN two NUTS (11) and ROTATE two RODS (10)
washers
in toward center.
REMOVE three self-tapping screws (12), three
13), and COVER (14) from control tower (15).
DISCARD self-tapping SCREWS.
REMOVE four cotter pins (16) and four PINS (17) from four control rods (18, 19, 20, and 21).
DISCARD cotter PINS.
REMOVE two cotter pins (22) and two WASHERS (23) from two control rods (24 and 25). DISCARD
cotter PINS.
8.
DISCONNECT two control RODS (24 and 25) from backhoe control valve (26).
4-524
