TM 5-2420-224-20-2
BACKHOE SWING CONTROL PEDAL REPLACEMENT (CONT)
2.
3.
4.
5.
REMOVE grease FITTING (4) from bracket (5).
REMOVE five KNOBS (6) from five control levers (7).
LOOSEN two NUTS (8) and ROTATE two outer control LEVERS (7) in toward center.
REMOVE three self-tapping screws (9), three washers (10), and COVER (11) from control tower (12).
DISCARD self-tapping SCREWS.
6.
7.
8.
9.
REMOVE cotter pin (13) and PIN (14) from shaft (15) and control rod (16). DISCARD rotter PIN.
REMOVE setscrew (17), shaft (15), and backhoe swing control PEDAL (18) from mounting bracket (19).
REMOVE two nuts (20), two lock washers (21), two screws (22), and mounting BRACKET (19) from
plate assembly (23). DISCARD lock WASHERS.
REPEAT STEPS 6 thru 8 for opposite backhoe swing control pedal.
4-519
