TM 5-2420-224-20-2
4.
REMOVE three screws (9), three lock
washers (10), three spring tension washers
(11), and rear BRACKET (12). DISCARD lock
WASHERS and spring tension WASHERS.
5.
REMOVE five bolts (13), five packings (14),
five washers (15), five nuts (16), rail (17), and
splash GUARD (18). DISCARD PACKINGS.
NOTE
Procedure is the same for both
front fenders.
1.
INSTALL splash GUARD (1), rail (2), five
bolts (3), five new packings (4), five washers
(5), and five nuts (6).
2.
INSTALL rear BRACKET (7), three screws (8),
three new lock washers (9), and three new
spring tension washers (10).
4-410
FRONT FENDER AND SPLASH GUARD REPLACEMENT (CONT)
INSTALLATION
