TM 5-2420-224-20-2
2.
REMOVE grease FlTTING (4) from bracket (5).
3.
REMOVE five KNOBS (6) from five control levers (7).
4.
LOOSEN two NUTS (8) and ROTATE two outer control LEVERS (7) in toward center.
5.
REMOVE three self-tapping screws (9), three washers (10), and COVER (11) from control tower (12).
6.
REMOVE four
7.
REMOVE two
PINS.
8.
DISCONNECT
cotter pins (13) and four PINS (14) from four control rods (15). DISCARD cotter
cotter PINS (16) and two washers (17) from two control rods (18). DISCARD
two control RODS (18) from backhoe control valve (19).
PINS.
cotter
4-405
BACKHOE CONTROL TOWER REPLACEMENT (CONT)
