TM 5-2420-224-20-2
BACKHOE CONTROL TOWER REPLACEMENT (CONT)
9.
10.
11.
REMOVE four lock nuts (20), four washers
(21), and four SCREWS (22) from backhoe
guard and plate assembly (23) and mounting
brackets (24). DISCARD lock NUTS.
NOTE
While performing step 10, it may
be
necessary
to
use
two
personnel.
REMOVE backhoe GUARD and PLATE
assembly (23) from four mounts (25) and
mounting brackets (24).
REMOVE four MOUNTS (25) from mounting
brackets (24).
I N S T A L L A T I ON
1.
2.
3.
INSTALL four
brackets (2).
MOUNTS (1) in mounting
NOTE
While performing step 2, it may be
necessary to use two personnel.
USING suitable LIFTING DEVICE, INSTALL
backhoe GUARD and PLATE assembly (3) on
four mounts (1).
INSTALL four SCREWS (4), four washers (5),
and four new lock nuts (6) in backhoe guard
and plate assembly (3) and mounting brackets
(2).
4-406