TM 5-2420-224-20-2
THROTTLE CONTROL SWITCH REPLACEMENT (CONT)
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
NOTE
Tag all wires and lines prior to disconnecting to aid in connecting.
DISCONNECT two WIRES (4 and 5) from two throttle switches (6 and 7) and SET CABINET assembly
ASIDE.
DISCONNECT ground WIRE (8) from throttle switch (6).
DISCONNECT three air TUBES (9, 10, and 11) from throttle switch (6).
REMOVE two screws (12), two lock washers (13), ground WIRE (8), and throttle SWITCH (6) from
bracket (14). DISCARD lock WASHERS.
REMOVE ELBOW (15) and TEE (16) from throttle switch (6).
DISCONNECT ground WIRE (17) from throttle switch (7).
DISCONNECT air TUBE (18) from throttle switch (7).
REMOVE two screws (19), two lock washers (20), ground WIRE (17), and throttle SWITCH (7) from
bracket (14). DISCARD lock WASHERS.
REMOVE air TUBE (9) from throttle switch (7).
REMOVE nut (21), screw (22), and BRACKET (14) from platform (23).
REMOVE two ELBOWS (24) from throttle switch (7).
4-159
