TM 5-2420-224-20-2
1.
2.
3.
4.
5.
6.
INSTALL five WIRES (1, 2, 3, 4, and 5) and four screws (6) on hydraulic tool switch (7)
ROLL two rubber COVERS (8 and 9) BACK into place.
INSTALL hydraulic tool SWITCH (7) and nut (10) in cabinet (11).
INSTALL KNOB (12) and TIGHTEN SETSCREW (13).
INSTALL two WIRES (14 and 15) and two screws (16) on work light switch (17).
REPEAT STEPS 2 thru 4 for work light SWITCH (17).
4-164
T O O L A N D W O R K L I G H T S W I T H C E S R E P L A C E M E N T ( C O N T )
