TM 5-2420-224-20-2
TOOL AND WORK LIGHT SWITCHES REPLACEMENT (CONT)
3.
4.
5.
6.
LOOSEN SETSCREW (5) and REMOVE KNOB (6).
REMOVE nut (7) and work light SWITCH (8).
ROLL BACK two rubber COVERS (9 and 10).
REMOVE two screws (11) and two WIRES (12 and 13).
7.
REPEAT STEPS 3 thru 5 for hydraulic tool SWITCH (14).
8.
REMOVE four screws (15) and five WIRES (16, 17, 18, 19, and 4).
4-163
