TM 5-2420-224-20-2
THROTTLE CONTROL SWITCH REPLACEMENT
This task covers:
a. Removal b. Installation
I N I T A L S E T U P
Applicable Configuration:
Equipment Condition:
SEE
Reference
Condition Description
Tools and Special Equipment:
Page 2-24
Batteries Disconnected
Tool Kit, SC 5180-90-CL-N26
Page 2-23
Air Pressure Relieved
Materials/Parts:
General Safety Instructions:
Washer, Lock (2)
W A R N I N G
D o n o t d i s c o n n e c t a n y a ir
system lines or fittings unless
vehicle engine is shut off and
air system pressure is relieved.
To do so could result in injury
to personnel.
1.
2.
3.
4.
5.
6.
7.
REMOVE seven SCREWS (1) and seven washers (2) from cabinet assembly (3).
Tag all wires and lines
DISCONNECT WIRE (4) from throttle
DISCONNECT ground WIRE (6) from
DISCONNECT two air TUBES (7 and
NOTE
prior to disconnecting to aid in connecting.
switch (5) and SET CABINET assembly (3) ASIDE.
throttle switch (5).
8) from throttle switch (5).
REMOVE two screws (9), two lock washers (10), ground WIRE (6), and throttle SWITCH (5) from
bracket (11). DISCARD lock WASHERS.
REMOVE nut (12), screw (13), and BRACKET (11) from platform (14).
REMOVE two ELBOWS (15 and 16) from throttle switch (5).
4-154
