TM 11-5895-1412-12&P
This chapter describes how to use the OUTPUT component of the BGU software.
Use this chapter to learn how to display completed SOI to the screen (see
Display, page 2-87), print packages of SOI data (see Print, page 2-93), output
data to be used for merging (see Diskette, Merge, page 2-98), load a ECCM fill
device (see ECCM, page 2-102).
Figure 2-72
To select XFER SOI/CEOI from the PAM Menu in Figure 2-72, position the small
arrow over the “XFER SOI/CEOI” block and press <RETURN>. The screen displays:
Loading “XFER SOI/CEOI”.
Next, the following message is displayed:
“Wait..obtaining the necessary files.
THE HOPSET FILE DOES NOT EXIST IN BECS FORMAT. IF
YOU WISH TO TRANSFER DATA TO AN EN. YOU MUST GO BACK
TO THE GENERATE SINCGARS PROGRAM AND SAVE THE HOPSET
IN BECS FORMAT. THE HOPSET FILE IN SINISS FORMAT CANNOT
BE USED FOR TRANSFER TO AN EN.
TO CONTINUE HIT ANY KEY
Hit any key and the screen shown in Figure 2-73 is displayed.
2-88
