DIRECT to engage the stylus and re-
ceive the copy.
Caution: Be careful when breaking
into the circuit to talk to the transmitting
operator. On some circuits with several
stations on a network, an attempt to
talk will spoil reception at the other
stations.
(2) When the complete picture has been re-
ceived, turn the selector switch to the
STANDBY position. Stop the motor,
using the procedure outlined in para-
graph 25d(2), and remove the copy. If
more traffic is on hand, attach a new
sheet of direct recording paper to the
drum. Proceed from the start, set the
wedge with the new transmitting levels,
and repeat the phasing procedure. If
all traffic has been cleared, throw the
power ON-OFF switch to the OFF
position.
36
