TM 9-1220-238-14
Section VI. DISASSEMBLY AND ASSEMBLY
disassembly sequence, and replace components and/or
3-16. General.
assemblies as required in reverse order. Refer to
This section describes procedures to be utilized in
disassembly and assembly of the board plotting M18
to lubrication, painting and cleaning. Refer to paragraph
which Is designed for minimum of maintenance.
b. Complete disassembly Is not always necessary
3-17. Board Plotting M18.
to make the required replacement or repair. Good
a.
The mechanical simplicity of assembly and
judgment should be exercised to keep disassembly and
disassembly of the component parts allocated to
assembly
to
a
minimum.
organizational maintenance is limited to replacement of
parts Refer to Figures B-1 through B-8 Illustrated in
3-9
