TM 9-1220-238-14
position.
scale assembly as directed in Chapter 4, paragraph 4-
(3) The distance shall measure no more than two
hundred and forty (0.240) thousandths of an Inch. If the
f. Friction Pad (fig. B-6).
(1) Check the friction pad for wear and/or damage
distance is equal to or greater than specified notify
direct support personnel and replace the shoe pad as
at least once a month or as operating conditions
instructed in Chapter 4, paragraph 4-17 cord. The frame
warrants.
assembly with disk attached must be removed to
(2) Measure the distance from the face of the pad
accomplish this procedure.
mounted to the shoe to the face of the pad (24) mounted
on the upper lip of the slide (25) with the brake lever
(13) fully depressed and held in the open
3-4
