TM 5-2420-224-20-2
BACKHOE ASSEMBLY REPLACEMENT (CONT)
11.
INSTALL BOX (4) and four screws (3)
12. INSTALL two WIRES (2) and two nuts (1)
and CAREFULLY ROLL rubber BOOTS OVER
connection.
13. INSTALL WORK LIGHT (page 4-186).
14. INSTALL REAR COMPOSITE STOPLIGHT/
TAILLIGHT (page 4-190).
15. DISENGAGE PTO (TM 5-2420-224-10).
16. SLOWLY MOVE VEHICLE AWAY from
backhoe assembly.
1.
REMOVE WORK LIGHT (page 4-186).
2.
REMOVE REAR COMPOSITE STOPLIGHT/
TAILLIGHT (page 4-190).
NOTE
Tag wires prior to removal to aid
In installation.
3.
CAREFULLY ROLL BACK rubber BOOTS and
REMOVE two nuts (1) and two WIRES (2).
4.
REMOVE four screws (3) and BOX (4).
5.
DISCONNECT backhoe CONNECTORS (5).
4-757
INSTALLATION
