TM 5-2420-224-20-2
BACKHOE BUCKET CYLINDER REPLACEMENT (CONT)
W A R N I N G
Support backhoe bucket links when removing front pin. Failure to do so could
result in injury to personnel.
2.
REMOVE 2 retaining rings (3 and
(9).
3.
REMOVE clamp (10), TUBE (11),
PACKINGS.
4), 11 washers (5 and 6), 2 pins (7 and 8), and bucket CYLINDER
two fittings (12 and 13), and two packings (14 and 15). DISCARD
1.
INSTALL two fittings (12 and 13), two new packings (14 and 15), TUBE (11), and clamp (10).
2.
INSTALL bucket CYLINDER (9), 2 pins (7 and 8), 11 washers (5 and 6), and 2 retaining rings (3 and
4).
3.
REMOVE CAPS or PLUGS. CONNECT two HOSES (1 and 2).
NOTE
Follow-on Maintenance:
Cycle backhoe bucket cylinder (TM 5-2420-224-10).
Check rear hydraulic tank (LO 5-2420-224-12).
4-669
I N S T A L L A T I ON
