TM 5-2420-224-20-2
LOADER BOOM CYLINDER REPLACEMENT (CONT)
2.
REMOVE
REMOVE
3.
REMOVE
bolt (3), lock washer (4), washer (5), and PIN (6)
boom CYLINDER (7). DISCARD lock WASHERS.
two clamps (8 and 9), two TUBES (10 and 11), and
from each end of boom cylinder (7).
two fittings (12 and 13).
INSTALLATION
NOTE
Procedure is the same for both boom cylinders.
1.
INSTALL two fittings (12 and 13), two TUBES (10 and 11), and two clamps (8 and 9).
2.
INSTALL boom CYLINDER (7). INSTALL PIN (6), washer (5), new lock washer (4), and bolt (3) in
each end of boom cylinder (7).
3.
REMOVE CAPS or PLUGS. CONNECT two HOSES (1 and 2).
NOTE
Follow-on Maintenance:
Check front hydraulic tank (LO 5-2420-224-12).
4-655
