TM 5-2420-224-20-2
REAR SHOCK ABSORBERS REPLACEMENT
This task covers:
a. Removal b. Installation
INITIAL SETUP
Tools and Special Equipment:
Materials/Parts:
Shop Equipment, SC 4910-95-CL-A74
Tool Kit, SC 5180-90-CL-N26
Washer, Lock
Nut, Lock
R E M O V AL
NOTE
Procedure is the same for both rear shock absorbers.
1.
REMOVE nut (1), lock washer (2), screw (3), and two SPACERS (4). DISCARD lock WASHER.
2.
REMOVE lock nut (5), washer (6), screw (7), and rear shock ABSORBER (8). DISCARD lock NUT.
3.
REMOVE two spacer SLEEVES (9) and two BUMPERS (10).
INSTALLATION
NOTE
Procedure is the same for both rear shock absorbers.
1.
INSTALL two BUMPERS (10) and two spacer SLEEVES (9).
2.
INSTALL rear shock ABSORBER (8), screw (7), washer (6), and new lock nut (5). TIGHTEN SCREW
to 177 lb-ft (240 N.m).
3.
INSTALL two SPACERS (4), screw (3), new lock washer (2), and nut (1).
4-372