TM 5-2420-224-20-2
FRONT SHOCK ABSORBERS REPLACEMENT (CONT)
INSTALLATION
NOTE
Procedure is the same for both front shock absorbers.
1.
INSTALL washer (1), banjo FITTING (2), new seal ring (3), and hollow SCREW (4).
2.
INSTALL CONNECTOR (5).
3.
INSTALL washer (6), spacer (7), washer (8), banjo FITTING (9), new seal ring (10), and hollow
SCREW (11).
4.
INSTALL CONNECTOR (12).
5.
INSTALL two BUMPERS (13).
6.
INSTALL front shock ABSORBER (14), two bolts (15), and two nuts (16). TIGHTEN BOLTS to 177
lb-ft (240 N.m).
7.
REMOVE CAPS or PLUGS. CONNECT two hydraulic HOSES
NOTE
Follow-on Maintenance:
Check suspension lockout oil level (LO 5-2420-24-12).
(17 and 18).
4-371
