TM 5-2420-224-20-2
FRONT SHOCK ABSORBERS REPLACEMENT
This task covers:
a. Removal b. Installation
Applicable Configuration:
Materials/Parts:
SEE
Washer, Lock (2)
Tools and Special Equipment:
Equipment Condition:
Shop Equipment, SC 4910-95-CL-A74
Tool Kit, SC 5180-90-CL-N26
Reference
Condition Description
Page 4-418
Cab Tilted
1.
2.
NOTE
Procedure is the same for both
front shock absorbers.
REMOVE two nuts (1 and 2), two lock
washers (3 and 4), two screws (5 and 6), and
shock ABSORBER (7). DISCARD lock
WASHERS.
REMOVE two SPACERS (8 and 9) and two
BUMPERS (10
INSTALLATION
1.
2.
a n d 1 1 ) .
NOTE
Procedure is the same for both
front shock absorbers.
INSTALL two BUMPERS (10 and 11) and two
SPACERS (8 and 9).
INSTALL shock ABSORBER (7), two screws
(5 and 6), two new lock washers (3 and 4),
and two nuts (1 and 2). TIGHTEN SCREWS
to 177 Ib-ft (240 N.m).
Lower
NOTE
Follow-on Maintenance:
cab (page 4-41 8).
4-368
INITIAL SETUP
R E M O V A L
