TM 5-2420-224-20-2
WATER MANIFOLD AND GASKET REPLACEMENT (CONT)
I N S T A L L A T I ON
1.
2.
3.
4.
C A U T I O N
Make sure all gasket material has been removed from mating surfaces to
prevent damage to equipment.
INSTALL cooling LINE (9), three
to 22 lb-ft (30 Nm).
INSTALL CONNECTOR (6), new
new gaskets (10 and 11), and four screws (8). TIGHTEN SCREWS
gasket (7), and two screws (5).
CONNECT
CONNECT
two HOSES (4) and TIGHTEN two CLAMPS (3).
BELLOWS (2) and TIGHTEN CLAMP (1).
NOTE
Follow-on Maintenance:
Install coolant expansion tank (page 4-96).
Install water temperature sending unit (page 4-203).
Fill cooling system (page 4-87).
Lower cab (page 4-418).
4-103