TM 5-2420-224-20-2
COOLANT WATER OUTLET REPLACEMENT
This task covers:
a. Removal b. Installation
INITIAL SETUP
Tools and Special Equipment:
Equipment Condition:
Shop Equipment, SC 4910-95-CL-A74
Reference
TooI Kit, SC 5180-90-CL-N26
Condition Description
Page 4-100
Coolant Thermostat
Materials/Parts:
Removed
Gasket
Page 4-87
Cooling System Drained
Gasket (2)
1.
REMOVE two SCREWS (1).
2.
M O V E C O N N E C T O R ( 2 ) A S I D E a n d
REMOVE and DISCARD GASKET (3).
3.
REMOVE two screws (4), screw (5), water
OUTLET (6), and two gaskets (7 and 8).
DISCARD GASKETS.
I N S T A L L A T I O N
C A U T I O N
Make sure all gasket material
has been removed from mating
surfaces to prevent damage to
equipment.
1.
INSTALL two new gaskets (7 and 8), water
OUTLET (6), screw (5), and two screws (4).
2.
INSTALL new gasket (3), CONNECTOR (2),
and two screws (1). TIGHTEN SCREWS to
22 Ib-ft (30 Nm).
NOTE
Follow-on Maintenance:
Install coolant thermostat (page
4-100).
Fill cooling system (page 4-87).
4-101
REMOVAL