TM 11-7021-202-12
CHAPTER 4
ORGANIZATIONAL MAINTENANCE
Section I. INTRODUCTION
4-1.
GENERAL
This chapter provides Organizational maintenance instructions and procedures for Data
Processing Set AN/UYK-64 (V). Organizational maintenance is limited to tasks defined in this
chapter. The more difficult tasks are referred to higher levels of maintenance.
At the completion of a repair procedure, turn the processor on and repeat the test originally
used to detect the problem. This ensures that repairs were accomplished satisfactorily and
the unit is operating properly. Refer to paragraph 2-7 for processor turn-on procedures.
Instructions for preparation of the unit for storage and shipment are given in chapter 5.
4-2.
TOOLS AND TEST EQUIPMENT
Tools and test equipment required for Organizational maintenance of the processor are
listed in the Maintenance Allocation Chart (MAC), Appendix B.
4-3.
SPECIAL TOOLS, TMDE, AND SUPPORT EQUIPMENT
There are no special tools, TMDE, or item of support equipment required at this level of
maintenance.
4-4.
REPAIR PARTS
Repair parts are listed and illustrated in TM 11-7021-202-20P.
4-5.
ORGANIZATIONAL MAINTENANCE TASKS
Following is a list summarizing the maintenance tasks to be performed as required by
Organizational maintenance personnel:
q Organizational PMCS
q Troubleshooting
q Equipment removal and replacement
q Cleaning
q Testing after replacements or repairs
4-1/(4-2 Blank)
