TM 5-2420-224-20-2
ACCELERATOR LINKAGE REPLACEMENT (CONT)
5.
INSTALL pivot BALL (11).
6.
INSTALL two nuts (12) and two ball SOCKETS (13) in connecting link (14).
7.
INSTALL connecting LINK (14) and CONNECT two ball SOCKETS (13).
8.
INSTALL two CLIPS (15).
9.
CONNECT SPRING (16).
10. CONNECT ROD (17) and INSTALL washer (18), and new cotter PIN (19).
NOTE
Follow-on Maintenance:
Install muffler pipes and clamps (page 4-81).
Lower cab (page 4-418).
Adjust accelerator linkage (page 4-68).
4 - 6 7
