TM 5-2420-224-20-2
ACCELERATOR LINKAGE REPLACEMENT (CONT)
2.
DISCONNECT SPRING (4).
3.
REMOVE two CLIPS (5)
4.
DISCONNECT two ball SOCKETS (6) and REMOVE connecting LINK (7).
5.
REMOVE two ball SOCKETS (6) and two nuts (8) from connecting link (7).
6.
REMOVE pivot BALL (9).
7.
REMOVE nut (10), bolt (11), and LEVER (12).
8.
REMOVE ball STUD (13) from lever (12).
9.
REMOVE spacer (14), SHAFT (15), and spacer (16).
10. REMOVE screw (17), spring tension washer (18), and BRACKET (19). DISCARD spring tension
WASHER.
4-65