TM 5-2420-224-20-2
FRONT LOADER LIFT ARM REPLACEMENT (CONT)
REMOVAL
1.
DISCONNECT two CYLINDERS (1 and 2) by REMOVING two bolts (3), two lock washers (4), two
washers (5), and two PINS (6). DISCARD lock WASHERS.
2.
REMOVE bolt (7), lock washer (8), washer (9), and PIN (10). DISCARD lock WASHER.
3.
REPEAT STEP 2 for other side and REMOVE swing ARM (11).
4.
IF DAMAGED, REMOVE two lubrication FITTINGS (12).
5.
REMOVE four BEARINGS (13).
INSTALLATION
1.
INSTALL four BEARINGS (13).
2.
IF REMOVED, INSTALL two new lubrication FITTINGS (12).
3.
INSTALL PIN (10), washer (9), new lock washer (8), and bolt (7) on both sides of swing arm (11).
INSTALL swing ARM.
4.
CONNECT two CYLINDERS (1 and
washers (4), and two bolts (3).
Install front loader bucket (page
2) by INSTALLING two PINS (6), two washers (5), two new lock
NOTE
Follow-on Maintenance:
4-802).
4-806