TM 5-2420-224-20-2
FRONT LOADER BUCKET REPLACEMENT (CONT)
3.
4.
5.
6.
7.
8.
9.
REMOVE nut (7), two washers (8), screw (9),
pin (10), and DISCONNECT front loader
BUCKET (11).
IF DAMAGED, REMOVE lubrication FITTING
(12) from pin (10).
EXTEND bucket CYLINDER (13) until pin (14)
clears front loader lift arms (15).
REMOVE roll pin (16) and PIN (14) and
DISCONNECT CYLINDER (13).
REMOVE screw (17), washer (18), lock
washer (19), and LINK (20). DISCARD lock
WASHER.
IF DAMAGED, REMOVE lubrication FITTING
(21) from link (20).
REPEAT STEPS 1 thru 8 for other side of
bucket (11).
INSTALLATION
1.
2.
3.
4.
5.
6.
7.
8.
IF REMOVED, INSTALL new lubrication
FITTING (21) in link (20).
INSTALL LINK (20), washer (19), new lock
washer (18), and screw (17).
CONNECT CYLINDER (13), link (5), and link
(20) and INSTALL PIN (14) and roll pin (16).
IF REMOVED, INSTALL new lubrication
FITTING (12) in pin (10).
INSTALL front loader BUCKET (11), pin (10),
two washers (8), screw (9), and nut (7).
IF REMOVED, INSTALL new lubrication
FITTING (6) in link (5).
INSTALL LINK (5), pin (4), two washers (2),
screw (3), and nut (1).
REPEAT STEPS 1 thru 7 for other side of
bucket (11).
4-803
