TM 5-2420-224-20-2
CRANE HORIZONTAL OUTRIGGER CYLINDER REPLACEMENT (CONT)
1.
DISCONNECT two HOSES (1 and 2). INSTALL CAPS or PLUGS.
2.
REMOVE CAPSCREW (3) and lock washer (4). DISCARD lock WASHER.
3.
REMOVE capscrew (5), lock nut (6), and horizontal outrigger CYLINDER (7). DISCARD lock NUT.
4.
REMOVE two FITTINGS (8 and 9).
NOTE
Procedure is the same for both horizontal outrigger cylinders.
1.
INSTALL two FITTINGS (8 and 9).
2.
INSTALL horizontal outrigger CYLINDER (7), capscrew (5), and new lock nut (6).
3.
INSTALL CAPSCREW (3) and new lock washer (4).
4.
REMOVE CAPS or PLUGS. CONNECT two HOSES (1 and 2).
NOTE
Follow-on Maintenance:
Check rear hydraulic tank (LO 5-2420-224-12).
4-699
