TM 5-2420-224-20-2
FORKLIFT TILT CYLINDER REPLACEMENT (CONT)
2.
REMOVE capscrew (3), lock washer (4), eye BOLT (5), and pin (6). DISCARD lock WASHER.
3. REMOVE two screws (7 and 8), retainer (9), and forklift tilt CYLINDER (10).
4.
REMOVE two FITTINGS (11 and 12).
INSTALLATION
NOTE
Procedure is the same for both tilt cylinders.
1.
INSTALL two FITTINGS (11 and 12).
2.
INSTALL forklift tilt CYLINDER (10, retainer (9), and two screws (8 and 7).
3.
INSTALL eye BOLT (5), pin (6), capscrew (3), and new lock washer (4).
4.
REMOVE CAPS or PLUGS. CONNECT two HOSES (1 and 2).
NOTE
Follow-on Maintenance:
Check front hydraulic tank (LO 5-2420-224-12).
4-687
