TM 5-2420-224-20-2
BACKHOE SWING CYLINDER REPLACEMENT (CONT)
NOTE
Tag screws prior to removal to aid in installation.
8.
REMOVE four screws (14), four washers (15), four nuts (16), two grips (17), retainer (18), and swing
BEAM (13). REMOVE JACK stand.
9.
REMOVE swing CYLINDER (7).
10. ON RIGHT swing CYLINDER, REMOVE three FITTINGS (19) and three packings (20). INSTALL CAPS
or PLUGS. DISCARD PACKINGS.
4-663
