TM 5-2420-224-20-2
FUEL INJECTOR LINES REPLACEMENT (CONT)
4.
5.
6.
NOTE
• If your vehicle has a four-piece clamp (5, 6, 7, and 8), perform step 4.
• If your vehicle has a two-piece clamp (9 and 10), perform step 5.
INSTALL CLAMP (5), loop clamp (6), shim (7), and screw (8).
INSTALL shim (9) and BRACKET (10).
USING SOCKET, CONNECT injector LINE (1) to injector pump (11). USING SOCKET< TIGHTEN
injector line NUT to 19 lb-ft (25 N•m).
NOTE
Follow-on Maintenance:
Install valve cover (page 4-3).
Bleed fuel system (page 4-41).
4-28
