TM 5-2420-224-20-2
HYDRAULIC SUSPENSION LOCKOUT FILTER REPLACEMENT (CONT)
R E M O V A L
1.
2.
3.
4.
5.
C A U T I O N
Cap or plug all ports and ends
of hoses and tubes to prevent
contamination of hydraulic oil.
Failure to do so may result in
damage to equipment.
NOTE
Tag lines prior to disconnecting to
aid in connecting.
DISCONNECT two hydraulic HOSES (1).
INSTALL CAPS or PLUGS.
REMOVE CONNECTOR (2)
D I S C A R D s e a l R I N G .
REMOVE
REMOVE
REMOVE
(6).
and seal ring (3).
check VALVE (4).
two bolts (5) and filter BODY (6).
filter ELEMENT (7) from filter body
1.
2.
3.
4.
5.
INSTALL filter ELEMENT (7) in filter body (6).
INSTALL filter BODY (6) and two bolts (5).
INSTALL check VALVE (4).
INSTALL new seal ring (3) and CONNECTOR
(2).
REMOVE CAPS or PLUGS. CONNECT two
hydraulic HOSES (1).
NOTE
Follow on Maintenance:
C h e c k h y d r a u l i c s u s p e n s i on
lockout reservoir (LO 5-2420-
224-12).
4-508
