TM 5-2420-224-20-2
WINDSHIELD WIPER/WASHER MOTOR LINKAGE REPLACEMENT (CONT)
R E M O V A L
NOTE
Procedure is the same for both vehicles.
1.
DISCONNECT connecting LINK (1) from drive member(2).
2.
REMOVE connecting LINK (1) from lever (3).
3.
DISCONNECT connecting LINK (4) from drive member (2).
4.
REMOVE connecting LINK (4) from drive member (5).
5.
REMOVE and DISCARD conical SEAL (6), NUT (7), WASHER (8), and WASHER (9) from drive
member (2).
6.
REMOVE and DISCARD conical SEAL (10), NUT (11), WASHER (12), and WASHER (13) from drive
member (5).
7.
REMOVE two bolts (14), two spring tension washers (15), and structural frame SECTION (16) from
cab. DISCARD spring tension WASHERS.
8.
REMOVE and DISCARD two NUTS (17) and two drive MEMBERS (2 and 5) from structural frame
section (16).
9.
REMOVE nut (18), washer (19), and LEVER (3) from structural frame section (16).
I N S T A L L A T I ON
NOTE
1.
2.
3.
4.
5.
6.
7.
8.
9.
INSTALL
INSTALL
INSTALL
cab.
INSTALL
Procedure is the same for both vehicles.
LEVER (3), washer (19), and nut (18) on structural frame section (16).
two new drive MEMBERS (2 and 5) and two new nuts (17) on structural frame section (16).
structural frame SECTION (16), two new spring tension washers (15), and two bolts (14) in
new washer (13), new washer (12), new nut (11), and new conical
member (5).
INSTALL new washer (9), new washer (8), new nut (7), and new conical SEAL
(2).
INSTALL connecting LINK (4) on drive member (5).
CONNECT connecting LINK (4) to drive member (2).
INSTALL connecting LINK (1) on lever (3).
CONNECT connecting LINK (1) to drive member (2).
Install
Install
Install
Install
Install
Install
NOTE
Follow-on Maintenance:
front loader (SEE) or forklift (HMMH) (page 4-794 or 4-546).
defroster and air tubes (page 4-486).
air cleaner ducts (page 4-38).
windshield wipers (page 4-482).
windshield wiper/washer motor (page 4-477).
inside engine hood (page 4-389).
SEAL (10) on drive
(6) on drive member
4-480
