TM 5-2420-224-20-2
WINDSHIELD WIPER/WASHER MOTOR REPLACEMENT (CONT)
R E M O V A L
NOTE
Procedure is the same for both vehicles.
1.
DISCONNECT electrical CONNECTOR (1).
2.
REMOVE NUT (2) and lock washer (3) and DISCONNECT LEVER (4). DISCARD lock WASHER.
3.
REMOVE two nuts (5), two washers (6), and wiper/washer MOTOR (7).
NOTE
Procedure is the same for both vehicles.
1.
INSTALL wiper/washer MOTOR (7), two washers (6), and two nuts (5).
2.
CONNECT LEVER (4) and INSTALL new lock washer (3) and NUT (2).
3.
CONNECT electrical CONNECTOR (1).
NOTE
Follow-on Maintenance:
Install defroster and air tubes (page 4-487).
Install air cleaner ducts (page 4-38).
Install front loader (SEE) or forklift (HMMH) (page 4-794 or 4-546)
I N S T A L L A T I ON
4-478