TM 5-2420-224-20-2
3.
REMOVE cotter pin (7) and castellated NUT
(8). DISCARD cotter PIN.
4.
USING suitable PULLER, REMOVE LEVER
(9).
5.
ON LEFT SIDE, REMOVE three washers (10)
and BUSHING (11).
6. ON RIGHT SIDE, REMOVE washer (12) and
BUSHING (13).
7.
REMOVE four lock nuts (14), four screws
(15), and two SPACERS (16).
4-379
REAR AXLE TORSION BAR REPLACEMENT (CONT)
