TM 5-2420-224-20-2
B R A K E D I S C A N D H U B R E P L A C E M E N T ( C O N T )
4.
REMOVE and DISCARD SPACER (4) and
SEAL (5).
If disc is gouged, measure thickness of disc at
deepest gouge. Minimum acceptable thickness is
0.8 in. (20 mm).
I N S T A L L A T I O N
NOTE
Procedure is the same for all
brake discs and hubs.
1.
USING INSTALLING TOOL and MANDREL,
INSTALL new SEAL (1) and new SPACER (2)
together.
2.
INSTALL DISC (3) and INSTALLATION
TOOLS.
4-266
I N S P E C T I O N
